Berkey is one of the best brands in the world when it comes to water filter manufacturing. They produce some of the best quality and most durable gravity water filters that efficiently filter sediments, chemicals, and bacteria without the use of electricity.
Berkey produces a wide range of water filters, from travel-sized ones to those that can be used in homes and offices. It ensures its customer’s clean filtered water at any time in the most cost-effective method possible.
Now, before we jump on the topic of when and if we should replace Berkey filters or how long they can last, we need to know how they work to understand them better. You need to know how they function to understand how long they will last.
Having said that, let’s see how a Berkey Filter works;
How does a Berkey Filter Work?
Berkey Water Filters use two methods to work; absorption and microfiltration. Absorption is the process in which atoms or molecules of a liquid stick to the surface of another material.
On the other hand, in microfiltration, a filter with millions of tiny holes is used. These holes or pores are big enough to allow water molecules to pass through but small enough to block other larger contaminants.
In Berkey Filters, both these processes work side by side to remove contaminants from the water to the microscopic level. To use it, you add water to the tank through its top. The water then drips down through the filters into the lower chamber from where you dispense it using a spigot.
What type of contaminants does a Berkey Filter remove?
A Berkey Filter removes a lot many types of contaminants, so many that they all cannot be listed on here. It works extremely well against sediment, rust as well as organic and non-organic contaminants such as bacteria, viruses, cysts, parasites, heavy metals, chemicals, and parasites.
A Berkey water filter can also be used to remove up to 98% of Fluoride from the water if you use the optional PF-2 Fluoride arsenic filter with it. Moreover, Berkey filters also get rid of any smell or bad taste that the water might have.
Why is Berkey Water Filter important?
Berkey Water filters are the best gravity water filters in the market. They do not use any electricity and hence, are completely environment friendly. Berkey filters produce the mist healthy drinking water that a filter can give.
They provide you with top-of-the-line pure water by removing hundreds of contaminants from it. These filters remove VOCs, Chlorine, Fluoride, pesticides, parasites, viruses, bacteria as well as hundreds of other contaminants from the water.
Moreover, Berkey Water filters are the most economical water filter systems available
How Long Do Berkey Filters last?
The manufacturer recommended time for replacing a Berkey filter is 3000 gallons. Each Berkey filter will efficiently filter 3000 gallons of water before its pores fill up or before it lets contaminants pass through.
If you have a filtration system that uses two Berkey filters, then you will need to change them after 6000 gallons since both gallons will be filtering the water at the same time.
Berkey filters work by absorbing or trapping debris, contaminants, and other pollutants within themselves. So, obviously, there comes a time when all of their pores get filled and they become incapable of filtering anything else.
If you want to know if your Berkey filter is good anymore or not, you just need to have a look at its outlet. If the flow rate is satisfactory, then it is working efficiently, otherwise, the filter is clogged and needs to be cleaned or replaced.
Are Berkey Filters Recyclable?
It is not recommended that you recycle bakery filters. They are made to be only used once and it is impossible to clean them out once their microscopic pores have been filled with contaminants.
If you try to use them again or try to use a chemical to clean them, they might become toxic altogether due to their material composition.
How to Extend the Lifespan of a Berkey Water Filter?
You can use the following ways to extend the lifespan of your Berkey filters;
- Try to put clean water into your system. By clean water, I mean one that is not full of rocks or leaves, or dirt. If you are using the filter to clean tap water, then it is not a problem. But if you are using it to filter water from a lake, a pond, or a creek, then you should put a piece of cloth as a pre-filter. The cloth can stop big pieces of rock and dirt from entering and blocking the filter. Put the cloth over the top chamber inlet and let the water pass through it.
- If you feel as if the flow rate of the filter has dropped, try cleaning the filter with a Scotch Brite pad under running water. This will get rid of a lot of dirt and particulate from the outside of the filter and hopefully, the water flow will improve.
But if it doesn’t improve even after doing this, then you should realize that it is time to get new filters.
- Different companies that manufacture the Berkey filter carry different warranties. One company might allow for 2 years of protected warranty while the other might give just 6 months.
So be sure to choose the one that suits you better so that you can get your money’s worth if the time comes.
After going through this article, I am sure that you will be much clearer on how long do Berkey filters last?. Moreover, I am certain that you must have understood the significance of using a Berkey filter.
Thank you for giving this article a read and Good Luck!